GENERAL TERMS AND CONDITIONS OF SERVICE
(Continued)
2. QUALITY OF GAS (Continued)
2.2 Quality Tests: (Continued)
(b) (Continued)
Measurement of Gross Heating Value with the calorimeters
shall comply with the standards set forth in the American
Society for Testing and Materials' ASTM D 1826. Analysis
of gas with gas chromatograph shall comply with the
standards set forth in ASTM D 1945. Calculation of the
gross heating value from compositional analysis by gas
chromatography shall comply with the standards set forth in
ASTM D 3588.
NBP or its agent shall calibrate and maintain the Gross
Heating Value measurement device at intervals as agreed
upon by NBP and Shipper. Shipper shall have access to
NBP's devices and shall be allowed to inspect the services
and all charts or other records of measurement at any
reasonable time.
(c) Tests shall be made to determine the total sulphur,
hydrogen sulfide, carbon dioxide and oxygen content of the
gas, by approved standard methods in general use in the gas
industry, and to determine the hydrocarbon dew-point and
water vapor content of such gas by methods satisfactory to
the parties. Tests shall be made frequently enough to
ensure that the gas is conforming continuously to the
quality requirements. Shipper shall have the right to
require NBP to have remedied any deficiency in quality of
the gas and, in the event such deficiency is not remedied,
the right, in addition to all other remedies available to
it by law, to refuse to accept such deficient gas until
such deficiency is remedied.
|
Issued by: John A Roscher, Director of Rates & Regulatory Affairs
Issued on: January 11, 2008 Effective on: February 15, 2008
Filed to comply with order of the Federal Energy Regulatory Commission, Docket
No. CP06-61, et al., issued October 2, 2007, 21 FERC ¶ 61,010 |